February 2009 – The endless completion
When we last wrote, the house was starting to grow up from the ground and the framing was up. At this stage, we thought everything would go fast and our builder was confident our house would be finished (shell only) before Christmas…early December. The plans were to complete the house when we were in the U.S. Yiiipeee! It was great, we were looking forward to having a surprise on our return! After, 3 weeks in the U.S. we were happy to find doors and windows in, a roof almost completed and the start of what will be our verandah. We were very happy to see this after all the effort we had put into refinishing the windows. They look great on and they work!
We originally planned to leave the external walls made of plywood and battens untreated so that they get naturally weathered. Well, naaa… this ‘new box’ looking house didn’t look right to us, and waiting for it to weather would be too long! We decided to stain it before they completed the cladding. What a great decision! The next week-end, on our late Friday arrival, we were stunned by how good it looks in this chocolate colour. It enhanced the windows and doors and gave it more character.
Since the house was not finished and we couldn’t start any work inside, we did a clean up of the tipi, finding all kinds of weird insects and slugs that made it their home. We also built the water pump box behind the tank. The following weekend we started oiling our timber ceiling. We also enjoyed a lot of good sun after the very cold Atlanta winter… And finally we had our first nights inside our new home! First with the foam mattresses, then with a better bed brought from Auckland, in the loft area under the beautiful tongue and groove timber ceiling.
Now that our builder has finished working inside, we started the flooring project. We had been looking at options for recycled flooring all across Auckland region. We wanted either Kauri, Rimu or Matai floorboards. Most demolition yards stock such timber in various conditions. We initially made contact and agreed on a stock of 500m of recycled flooring from south Auckland, but on the day of checking the stock, we found out that the boards were in terrible shape, with loads of tongue damaged and holes. We were very disappointed (as we had organized delivery the same week). Seb rushed to another yard he had identified in Helensville (45km north, so close to 80km to were he was!). There, the friendly guy showed him what he had. “Yep, that’s our flooring there!†All their boards are made of recycled joists and beams, so they aren’t full of nail holes. Instead, they have the odd strange holes and defects that make it look very different…gives it character. Overall, a very good product, reconditioned to a good standard, and one that doesn’t initially require sanding! (saving $2000). The next day, the demolition guy and Seb had a great time sorting board by board and piling them for transport, which we managed to organize for the next day. After many phone calls and fine-tuning with Coromandel people for the last leg, the timber arrives safely on our land. Pfffiouu!
Waitangi week-end was spent laying our floorboards. Such hard work! In three days, we managed to do about half of the house, at the expense of 3 broken drill bits, a knocked finger, lots of swearing when the tongue didn’t want to go in the groove, and a 12-pack of beer under the hard sun. The result is an outstanding, and even our builder – usually unimpressed by our shenanigans – said we have done a good job. Good aye? We just another three days to go before it’s done but they then we should have our process down. Then, there are just a few more things to do…plumbing, gas fitting, wiring, bathroom, kitchen, jib, skirtings, etc, etc, etc…
In the meantime, the house will be finished outside. Before the end of February, we should have our verandah finished, waste water pipes in the ground, and the site cleared up!
To be continued…